- Store
- >
- Amps & PAs
- >
- M-Audio BX5-D3 Studio Monitors Desktop Home Speakers (Pair)
M-Audio BX5-D3 Studio Monitors Desktop Home Speakers (Pair)
SKU:
£199.00
£199.00
Unavailable
per item
A monitor’s drivers are the heart and soul of its performance. Driving the low-end and midrange, BX5-D3’s 5-inch military-grade Kevlar® woofers are rigid and lightweight, delivering outstanding transient response whist negating unwanted “cone breakup.” BX5-D3’s treated silk dome tweeter provides the perfect combination of low mass and the absence of audible resonances that plague conventional tweeters.
Description
Bi-amplified design with 100 watts (60 LF, 40 HF) for powerful, accurate sound
5” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
1” natural silk dome tweeter delivers superb transient details
New computer-optimized tweeter waveguide for precise imaging
Acoustic Space Control to fine-tune low-end response to your room
Optimized rear port for extended low-frequency response
XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
Volume control enables you to dial in the perfect monitor playback level
Ultra-wide range 52-35kHz frequency response covers full musical spectrum
Front panel LED shines brightly when speaker is positioned at ideal monitor angle
Specifications
TYPE: 2-way near-field studio reference monitors
LOW FREQ. DRIVER: 5 inch (127mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded
HIGH FREQ. DRIVER: 1 inch (25mm) magnetically shielded natural silk dome
FREQUENCY RESPONSE: 52 Hz – 35 kHz
ROSSOVER FREQUENCY: 2.5kHz
LOW FREQ. AMPLIFIER POWER: 60W
HIGH FREQ. AMPLIFIER POWER: 40W
MAXIMUM PEAK SPL: 110 dB SPL - Full Bandwidth Pink Noise Measured
INPUT SENSITIVITY: -10dBU
INPUT CONNECTORS: 1x XLR balanced input connector 1x TRS balanced/unbalanced input connector
INPUT IMPEDANCE: 10kΩ balanced, 20kΩ unbalanced
POLARITY: Positive signal at + input produce outward LF cone displacement
PROTECTION: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse
POWER Voltage: 100–120V, 50/60 Hz / 220–240V, 50/60 Hz
POWER Consumption: 100W
FUSE: 220–240V~ T1AL 250V / 100–120V~ T1.6AL 250V
CABINET: Vinyl-laminated high-acoustic-efficiency MDF
Dimensions
6.9 x 7.8 x 10 in (176 x 197 x 254 mm)
Weight
12.3 lb (5.6 kg)6.9 x 7.8 x 10 in (176 x 197 x 254 mm)
Description
Bi-amplified design with 100 watts (60 LF, 40 HF) for powerful, accurate sound
5” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
1” natural silk dome tweeter delivers superb transient details
New computer-optimized tweeter waveguide for precise imaging
Acoustic Space Control to fine-tune low-end response to your room
Optimized rear port for extended low-frequency response
XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
Volume control enables you to dial in the perfect monitor playback level
Ultra-wide range 52-35kHz frequency response covers full musical spectrum
Front panel LED shines brightly when speaker is positioned at ideal monitor angle
Specifications
TYPE: 2-way near-field studio reference monitors
LOW FREQ. DRIVER: 5 inch (127mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded
HIGH FREQ. DRIVER: 1 inch (25mm) magnetically shielded natural silk dome
FREQUENCY RESPONSE: 52 Hz – 35 kHz
ROSSOVER FREQUENCY: 2.5kHz
LOW FREQ. AMPLIFIER POWER: 60W
HIGH FREQ. AMPLIFIER POWER: 40W
MAXIMUM PEAK SPL: 110 dB SPL - Full Bandwidth Pink Noise Measured
INPUT SENSITIVITY: -10dBU
INPUT CONNECTORS: 1x XLR balanced input connector 1x TRS balanced/unbalanced input connector
INPUT IMPEDANCE: 10kΩ balanced, 20kΩ unbalanced
POLARITY: Positive signal at + input produce outward LF cone displacement
PROTECTION: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse
POWER Voltage: 100–120V, 50/60 Hz / 220–240V, 50/60 Hz
POWER Consumption: 100W
FUSE: 220–240V~ T1AL 250V / 100–120V~ T1.6AL 250V
CABINET: Vinyl-laminated high-acoustic-efficiency MDF
Dimensions
6.9 x 7.8 x 10 in (176 x 197 x 254 mm)
Weight
12.3 lb (5.6 kg)6.9 x 7.8 x 10 in (176 x 197 x 254 mm)
Sold Out